If you're a project manager, procurement lead, or contractor specifying Cosentino materials on a kitchen or bathroom build-out, this is for you. I manage a surface materials budget of roughly $180,000 annually for a mid-sized design-build firm. Over the past six years, I've processed more than 40 orders involving Silestone by Cosentino quartz, Dekton for cosentino flooring applications, and the occasional Sensa granite run. I've also made enough expensive mistakes to build a checklist that I now refuse to work without.
This list has nine steps. Follow them in order. Skipping step 4 is the one that usually costs people the most money—more on that below.
Silestone, Dekton, and Sensa are not interchangeable. They solve different problems. Silestone is an engineered quartz—great for kitchen countertops, bathroom vanities, and interior wall cladding. Dekton is an ultra-compact surface that handles outdoor exposure and high-traffic cosentino flooring scenarios. Sensa is natural granite with a protective treatment.
Checkpoint: Before you request a single quote, write one sentence describing where the material goes and what it touches. If that sentence includes the words "outdoor" or "floor," you're probably not looking at Silestone.
I learned this the hard way in 2022 when I spec'd Silestone for a covered patio floor. The fabricator caught it. I didn't. That near-miss alone justified building the checklist.
"Silestone by Cosentino quartz" is not a specification. It's a category. Silestone has dozens of colorways, and the visual difference between two whites is often subtle in a showroom and obvious on a 30-square-meter kitchen island.
Your purchase order should include: series name, color code, slab thickness (12mm, 20mm, or 30mm are common), and finish (polished, matte, suede). Get it in writing from your fabricator or distributor. Verbal confirmations don't survive personnel changes.
Checkpoint: Read the color code back to the fabricator over the phone and have them repeat it. If they hesitate, the order isn't confirmed.
Most first-time buyers underestimate slab requirements. For a straightforward L-shaped kitchen, 15% waste is reasonable. For anything with multiple cutouts, angled walls, or book-matched veining, push it to 20%.
Here's the math I use: measure the actual surface area, add 15% for standard cuts, then add another 5% if the layout includes more than two sink or cooktop cutouts. That extra 5% has saved me from reordering a discontinued colorway twice.
Checkpoint: Confirm with the fabricator whether waste is billed at slab price or a discounted rate. This single line item can swing a quote by 8–12%.
This is the one. Cosentino maintains a network of authorized fabricators. Using an unauthorized shop doesn't automatically void your warranty—but it can complicate claims, and I've seen it happen.
In Q1 2024, we used a lower-cost fabricator for a rental unit refresh. The work looked fine. Six months later, a seam failed on a Silestone countertop. When we filed the claim, the first question was whether the fabricator was in the authorized network. They weren't. We ate the repair cost—roughly $1,100.
Checkpoint: Ask for the fabricator's authorization number or verify directly with your Cosentino distributor. It takes five minutes.
Five minutes of verification beats five days of correction. That's not a slogan—it's the line item that convinced my director to approve the checklist as policy.
Base slab pricing rarely includes fabrication labor for cutouts. A standard sink cutout might run $150–$300 depending on the shop. A shower valve cutout in a bathroom panel is usually a separate line item because it requires precise placement and sometimes reinforcement.
Ask for a line-item breakdown: per-linear-meter cutting, edge polishing, sink cutout, faucet hole drilling, and any shower valve or niche cutouts. If the fabricator won't break it out, that's a yellow flag.
Checkpoint: Compare at least three quotes on the fabrication line items, not just the slab price. I've seen slab prices differ by 6% while fabrication differed by 40%.
Cosentino publishes warranty terms that vary by product line and by commercial versus residential use. The Silestone warranty for residential applications is different from the commercial one. Dekton has its own terms.
Don't rely on what the sales rep says at the showroom. Ask for the written warranty document and read the exclusions. Common exclusions include damage from improper cleaning chemicals, heat shock on certain finishes, and installation by non-authorized fabricators.
Checkpoint: File the warranty PDF in your project folder before the first slab is cut. If you can't find it, you don't have it.
Digital renderings lie. Even physical samples vary by batch. For brand-critical color matching, the industry tolerance is generally Delta E < 2 for colors that need to match exactly; Delta E of 2–4 is noticeable to trained eyes; above 4 is visible to most people.
If your project involves matching a Silestone countertop to an existing floor or a specified paint color, get a physical sample and compare it under the actual lighting conditions on site. I'm not 100% sure every fabricator will do this for free, but most will include it if you ask before the order is finalized.
Checkpoint: Photograph the approved sample next to a color reference card and attach it to the purchase order.
Slabs are heavy, fragile, and expensive to replace. The quote should state who is responsible for transport from the distributor to the fabricator, and from the fabricator to the job site. It should also state who bears the risk of breakage during each leg.
We had a delivery arrive with a cracked corner in 2021. The distributor blamed the freight company. The freight company blamed the fabricator's loading dock. Nobody wanted to pay for the replacement slab. We eventually split it three ways, but the delay cost us a week on the install schedule.
Checkpoint: Get the Incoterms or a simple written sentence stating transfer of risk. "Risk transfers to buyer upon loading at distributor" is very different from "risk transfers upon signed acceptance at job site."
Define what "acceptable" looks like before the installers arrive. Seam visibility, edge profile consistency, and cutout placement tolerance should all be in writing. If you wait until after installation to negotiate, you've lost leverage.
A practical standard: seams should be tight enough that a business card won't slide in more than 2mm. Edge profiles should match the approved sample. Cutouts should align with the fixture template within 3mm.
Checkpoint: Walk the installed surface with the fabricator's lead before final payment. Sign off in writing—or don't pay.
Comparing slab prices only. The slab is often 40–50% of the total installed cost. Fabrication, cutouts, delivery, and installation make up the rest. A cheap slab with expensive fabrication is not a cheap project.
Assuming the showroom quote is the final quote. Showroom quotes are frequently based on "standard" layouts. Your actual layout—with the shower valve cutout, the weird corner, and the book-matched veining—is not standard.
Forgetting that color batches vary. If your project requires two separate orders (say, kitchen now and bathroom later), order all slabs at once if you can. Batch variation is real, and Cosentino's own guidelines acknowledge that natural and engineered materials can vary slightly between production runs.
That's the checklist. Nine steps, one fabricator authorization call, and a written acceptance standard. It won't make procurement exciting, but it will keep your budget off the rework column.